High-performance Lithium-sulfur Batteries Research Articles

Covalent Organic Framework/Aluminum Oxide Composite Nanosheets as a Separator for High-Performance Lithium–Sulfur Batteries

Covalent Organic Framework/Aluminum Oxide Composite Nanosheets as a Separator for High-Performance Lithium–Sulfur Batteries

Electrochemical Restructuring Driven Catalytic Cycle of Bi-Based Heterojunctions for High-Performance Lithium-Sulfur Batteries.

Restructuring is an important phenomenon in catalytic reactions. Conversion-type materials with suitable redox potential may undergo in situ electrochemically driven restructurings and induce highly active catalytic sites in a working lithium-sulfur battery. Herein, driven by the electrochemical conversion reaction of BiVO4, a reversible catalytic cycle of Bi/amorphous Li3VO4 (a-Li3VO4) and Bi2S3/a-Li3VO4 heterojunctions is constructed, which targets the oxidation of Li2S and the conversion of polysulfide, respectively. The heterostructures and electrochemically driven size confinement provide abundant sites for shuttle restraining and sulfur conversion. Especially, the p-block Bi and Bi2S3 could dramatically reduce the conversion energy barriers of Li2S and polysulfide by virtue of the p-p orbital hybridization, promoting bidirectional reactions of the sulfur cathode. As a result, the corresponding sulfur cathode possesses a high reversible capacity of 7.5 mAh cm-2 after 120 cycles under a high sulfur loading of 10.3 mg cm-2 with a current density of 0.38 mA cm-2. This study furnishes a feasible scheme to obtain highly effective catalysts for bidirectional sulfur redox by utilizing the electrochemically induced restructuring.

Polyaniline-Coated Cobalt–Iron Oxide Composites Modified Separator for High Performance Lithium–Sulfur Batteries

Polyaniline-Coated Cobalt–Iron Oxide Composites Modified Separator for High Performance Lithium–Sulfur Batteries

Flower-like covalent organic frameworks as host materials for high-performance lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries have emerged as a promising alternative energy storage system due to their high energy density and cost-effectiveness. However, practical applications of Li-S batteries are hindered by challenges such as the shuttle effect and sluggish redox kinetics. In this study, a three-dimensional (3D) flower-like diaminoanthraquinone (DAAQ)-covalent organic framework (COF) was developed, featuring nanorod-like petals and enriched with abundant N and O adsorption sites, serving as a host material for the sulfur cathode of Li-S batteries. Through a process of sulfur melting-diffusion, the resulting DAAQ-COF@S cathode material demonstrated a stable 3D cross-linked morphology with a hierarchical pore structure, maximizing the exposure of N/O adsorptive sites and facilitating rapid ion diffusion. This effectively inhibited the shuttling effect of lithium polysulfides (LiPSs) and enhanced rate performance. Consequently, DAAQ-COF@S cathodes exhibited a high initial discharge capacity of 1182.0 mAh g−1 at 0.1 C, with a capacity retention rate of 79.6% after 500 cycles at 2 C. Even at a high current density of 4 C, they maintained a high capacity of 616.8 mAh g−1, surpassing the majority of previously reported COF-based host materials for Li-S batteries. This work underscores the significance of COF micromorphology and advances the development of high-performance cathodes for Li-S batteries.

Formation of 2D Amorphous Lithium Sulfide Enabled by Mo2C Clusters Loaded Carbon Scaffold for High-Performance Lithium Sulfur Batteries.

Lithium-sulfur (Li-S) batteries, operated through the interconversion between sulfur and solid-state lithium sulfide, are regarded as next-generation energy storage systems. However, the sluggish kinetics of lithium sulfide deposition/dissolution, caused by its insoluble and insulated nature, hampers the practical use of Li-S batteries. Herein, leaf-like carbon scaffold (LCS) with the modification of Mo2C clusters (Mo2C@LCS) is reported as host material of sulfur powder. During cycles, the dissociative Mo ions at the Mo2C@LCS/electrolyte interface are detected to exhibit competitive binding energy with Li ions for lithium sulfide anions, which disrupts the deposition behavior of crystalline lithium sulfide and trends a shift in the configuration of lithium sulfide toward an amorphous structure. Combining the related electrochemical study and first-principle calculation, it is revealed that the formation of amorphous lithium sulfides shows significantly improved kinetics for lithium sulfide deposition and decomposition. As a result, the obtained Mo2C@LCS/S cathode shows an ultralow capacity decay rate of 0.015% per cycle at a high mass loading of 9.5mg cm-2 after 700 cycles. More strikingly, an ultrahigh sulfur loading of 61.2mg cm-2 can also be achieved. This work defines an efficacious strategy to advance the commercialization of Mo2C@LCS host for Li-S batteries.

Three-Dimensional Reticulated Fe–Co Sulfide/Graphene/CNTs Composites as Functional Interlayer Capturing and Converting Polysulfide for High-Performance Lithium–Sulfur Batteries

Three-Dimensional Reticulated Fe–Co Sulfide/Graphene/CNTs Composites as Functional Interlayer Capturing and Converting Polysulfide for High-Performance Lithium–Sulfur Batteries

ZnO/ZnS heterostructure in N-doped porous carbon for anchoring–diffusion–conversion of polysulfides for high-performance lithium–sulfur batteries

ZnO/ZnS heterostructure in N-doped porous carbon for anchoring–diffusion–conversion of polysulfides for high-performance lithium–sulfur batteries

Natural Microcellulose Fibers as Intercalants of Graphitic Cathodes for High-Performance Lithium–Sulfur Batteries

Natural Microcellulose Fibers as Intercalants of Graphitic Cathodes for High-Performance Lithium–Sulfur Batteries

Achieving High-Performance Lithium-Sulfur Batteries by Modulating Li+ Desolvation Barrier with Liquid Crystal Polymers.

Lithium-sulfur (Li-S) batteries offer high theoretical capacity but are hindered by poor rate capability and cycling stability due to sluggish Li2S precipitation kinetics. Here a sulfonate-group-rich liquid crystal polymer (poly-2,2'-disulfonyl-4,4'-benzidine terephthalamide, PBDT) is designed and fabricated to accelerate Li2S precipitation by promoting the desolvation of Li+ from electrolyte. PBDT-modified separators are employed to assemble Li-S batteries, which deliver a remarkable rate capacity (761 mAh g-1 at 4 C) and cycling stability (500 cycles with an average decay rate of 0.088% per cycle at 0.5 C). A PBDT-based pouch cell even delivers an exceptional capacity of ≈1400 mAh g-1 and an areal capacity of ≈11 mAh cm-2 under lean-electrolyte and high-sulfur-loading condition, demonstrating promise for practical applications. Results of Raman spectra, molecular dynamic (MD) and density functional theory (DFT) calculations reveal that the abundant anionic sulfonate groups of PBDT aid in Li+ desolvation by attenuating Li+-solvent interactions and lowering the desolvation energy barrier. Plus, the polysulfide adsorption/catalysis is also excluded via electrostatic repulsion. This work elucidates the critical impact of Li+ desolvation on Li-S batteries and provides a new design direction for advanced Li-S batteries.

Sulfur confinement into highly porous banana peduncle-derived carbon for high-rate performance lithium‑sulfur battery

In this work, we introduce a facile route to synthesize an eco-friendly and inexpensive cathode host material to address the critical challenges of insulating sulfur, polysulfide shutting, and volume changes for lithium‑sulfur batteries (LSBs). The cathode uses banana peduncle, a biomass as a carbon precursor, to enhance the specific surface area and porosity after chemical activation. The two approaches (with/without the outer layer and with/without activation) have been compared to substantiate the role of banana skin and activation in boosting the performance of LSB. The carbon‑sulfur composite prepared with a sulfur loading of 75 % yields a significantly high initial discharge capacity of 1498 mA h g−1 at 0.1C, which remains stable with a very minimal capacity decay for the subsequent 100 charge-discharge cycles. Even at a high current rate (2C), the electrode shows a remarkable discharge capacity of 1076 mA h g−1, reflecting the efficacy of the as-fabricated cathode for LSB for high current applications. Further, the cycling performance is corroborated with high aerial sulfur loading (4 mg cm−2) to investigate the commercial feasibility. This confirms the advantage of the highly porous cathode matrix (surface area: 3148.42 m2 g−1 and pore volume: 2.51 cm3 g−1) in confining the lithium polysulfides and the volume expansion during charge-discharge cycles. To the best of our knowledge, this is the first-time banana peduncle has been used as a source of electrode material, and the present approach may pave the path for developing a green and sustainable, low-cost, highly porous carbon made from waste material as a sulfur host for high-performance LSB.

Regulating the P-band center of SnS2-SnO2 heterostructure to boost the redox kinetics for high-performance lithium-sulfur battery

Lithium-sulfur batteries (LSBs) are considered a strong contender for the new-generation secondary energy storage system due to their high capacity and energy density. However, the sluggish reaction kinetics and the shuttle effect of lithium polysulfides (LPSs) severely hinder the cycle stability. The robust design of both the separator and cathode exhibit an effective role in restricting the shuttle effect and accelerating redox kinetics through the LPSs trapping and catalyzing effect. In this paper, a CNT-modified tin sulfide and tin oxide (SnS2-SnO2-CNTs) heterostructure was constructed as a multifunctional catalyst to modify both the separator and cathode to achieve high-performance LSBs. The formation of SnS2-SnO2 heterostructure promotes the movement of the P band center of the tin atom to the Fermi level, which realizes the association process of adsorption, capture, and conversion of LPSs, thus effectively suppressing the shuttle effect. The SnS2-SnO2 heterogeneous interface can also reduce the deposition barrier of Li2S, thus greatly promoting the redox kinetics. Together with the improved electron transfer, the resulting LSBs with the robust electrode and separator exhibit superior electrochemical performance with a high initial capacity of 930.2 mAh g−1 at 1 C with a high sulfur loading of 4.3 mg cm−2 and a remarkable capacity of up to 580.3 mAh g−1 at an ultrahigh rate of 7.4 C.

Spontaneous built-in electric field in heterostructure electrocatalysts with high catalytic activity and conductivity: Inducing 3D nucleation of Li2S

Lithium-sulfur (Li-S) batteries have become a research focus due to their high theoretical specific capacity and energy density. The shuttle effect and slow sulfur conversion kinetics of lithium polysulfides (LiPSs) severely hindered their practical application. Here, a N-doped carbon nanofiber self-supporting electrode modified with cobalt selenide/nickel selenide as a sulfur carrier (CoSe2/NiSe2@NCNFs) is designed and constructed. The experimental results show that a built-in electric field is formed at the interface of CoSe2/NiSe2 Mott-Schottky heterostructure, which promotes the conversion of LiPSs and induces 3D nucleation of Li2S. Furthermore, the calculation results of density functional theory clearly reveal high conductivity, adsorption and interfacial charge transfer between CoSe2/NiSe2 Mott-Schottky heterostructure electrocatalyst and LiPSs. As a result, the CoSe2/NiSe2@NCNFs/S cathode shows a specific capacity of 1050.8 mAh g−1 at 1 C, and maintains excellent cycling performance with a discharge capacity of 735.1 mAh g−1 and a capacity decay of 0.003 % per cycle over 1000 cycles. This work designed a Mott-Schottky heterostructure electrocatalyst to strengthen the adsorption and conversion of LiPSs and induce 3D nucleation of Li2S, providing a new idea for high-performance Li-S batteries.

Surface-Phosphided Metal Oxide Microspheres as Catalytic Host of Sulfur to Enhance the Performance of Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are one of the most promising high-energy density secondary batteries due to their high theoretical energy density of 2600 Wh kg-1. However, the sluggish kinetics and severe "shuttle effect" of polysulfides are the well-known barriers that hinder their practical applications. A carefully designed catalytic host of sulfur may be an effective strategy that not only accelerates the conversion of polysulfides but also limit their dissolution to mitigate the "shuttle effect." Herein, in situ surface-phosphided Ni0.96Co0.03Mn0.01O (p-NCMO) oxide microspheres are prepared via gas-phase phosphidation as a catalytic host of sulfur. The as-prepared unique heterostructured microspheres, with enriched surface-coated metal phosphide, exhibit superior synergistic effect of catalytic conversion and absorption of the otherwise soluble intermediate polysulfides. Correspondingly, the sulfur cathode exhibits excellent electrochemical performance, including a high initial discharge capacity (1162 mAh gs-1 at 0.1C), long cycling stability (491 mAh gs-1 after 1000 cycles at 1C), and excellent rate performance (565 mAh gs-1 at 5C). Importantly, the newly prepared sulfur cathode shows a high areal capacity of 4.0 mAh cm-2 and long cycle stability under harsh conditions (high sulfur loading of 5.3 mg cm-2 and lean electrolyte/sulfur ratio of 5.8 μL mg-1). This work proposes an effective strategy to develop the catalytic hosts of sulfur for achieving high-performance Li-S batteries via surface phosphidation.

ZIF-67-Derived Flexible Sulfur Cathode with Improved Redox Kinetics for High-Performance Li-S Batteries.

Lithium-sulfur (Li-S) batteries have received much attention due to their high energy density and low price. In recent years, alleviating the volume expansion and suppressing the shuttle effect during the charge and discharge processes of Li-S batteries have been widely addressed. However, the slow conversion kinetics from polysulfide (LiPSs) to Li2S2/Li2S still limits the application of Li-S batteries. Therefore, we designed a ZIF-67 grown on cellulose (named ZIF-67@CL) as an electrocatalyst to improve the interconversion kinetics from LiPSs to Li2S2/Li2S for Li-S batteries. Based on the results of adsorption experiments of LiPSs, ZIF-67@CL and CL hosts were immersed in Li2S4 solution to adsorb LiPSs, and the UV-Vis test was conducted on the supernatant after adsorption. The results showed that the ZIF-67@CL had a stronger adsorption for LiPSs compared with the cellulose (CL). Furthermore, in the Li2S nucleation tests, the fabricated cells were galvanostatically discharged to 2.06 V at 0.112 mA and then potentiostatically discharged at 2.05 V. Based on the results of Li2S nucleation tests, the catalytic effect of ZIF-67 was further verified. As a result, the sulfur cathode used a ZIF-67 catalyst (named S/ZIF-67@CL) and delivered an initial capacity of 1346 mAh g-1 at a current density of 0.2 C. Even at a high current density of 2 C, it exhibited a high-capacity performance of 1087 mAh g-1 on the first cycle and maintained a capacity output of 462 mAh g-1 after 150 cycles, with a Coulombic efficiency of over 99.82%.

Multifunctional Vanadium Nitride-Modified Separator for High-Performance Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are recognized as among the best potential alternative battery systems to lithium-ion batteries and have been widely investigated. However, the shuttle effect has severely restricted the advancement in their practical applications. Here, we prepare vanadium nitride (VN) nanoparticles grown in situ on a nitrogen-doped carbon skeleton (denoted as VN@NC) derived from the MAX phase and use it as separator modification materials for LSBs to suppress the shuttle effect and optimize electrochemical performance. Thanks to the outstanding catalytic performance of VN and the superior electrical conductivity of carbon skeleton derived from MAX, the synergistic effect between the two accelerates the kinetics of both lithium polysulfides (LiPSs) to Li2S and the reverse reaction, effectively suppresses the shuttle effect, and increases cathode sulfur availability, significantly enhancing the electrochemical performance of LSBs. LSBs constructed with VN@NC-modified separators achieve outstanding rate performance and cycle stability. With a capacity of 560 mAh g-1 at 4 C, it exhibits enhanced structural and chemical stability. At 1 C, the device has an incipient capacity of 1052.4 mAh g-1, and the degradation rate averaged only 0.085% over 400cycles. Meanwhile, the LSBs also show larger capacities and good cycling stability at a low electrolyte/sulfur ratio and high surface-loaded sulfur conditions. Thus, a facile and efficient way of preparing modified materials for separators is provided to realize high-performance LSBs.

MXene-Bimetallic Hybrids via Mixed Molten Salts Etching for Kinetics-Enhanced and Dendrite-Free Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries with high theoretical energy density (2600Whkg-1) are considered to be one of the most promising secondary batteries. However, the practical application of Li-S batteries is limited by the polysulfides shuttling and unstable lithium metal anodes. Herein, an asymmetric separator (CACNM@PP), composed of Co-Ni/MXene (CNM) on the cathode and Cu-Ag/MXene (CAM) on the anode for high-performance Li-S batteries is reported. For the cathode, CNM provides a synergistic effect by integrating Co, Ni, and MXene, resulting in strong chemical interactions and fast conversion kinetics for polysulfides. For the anode, CAM with abundant lithiophilicity active sites can lower the nucleation barrier of Li. Moreover, LiCl/LiF layers are generated in situ as an ion conductor layer during charging and discharging, inducing a uniform deposition of Li. Therefore, the assembled cells with the CACNM@PP separators harvest excellent electrochemical performance. This work provides novel insights into the development of commercially available high-energy density Li-S batteries with asymmetric separators.

N doped carbon supported cobalt/tungsten nitride Mott−Schottky heterojunction as an efficient electrocatalyst to enhance adsorption and conversion of lithium polysulfides for high-performance lithium–sulfur batteries

Lithium–sulfur batteries (LSBs) suffer from the dissolution of lithium polysulfides (LiPSs) which leading to capacity degradation and poor cycling stability. Hence, weʼve developed the Co/W3N4@NC Mott–Schottky heterostructures with built in electric field (BIF) are prepared as catalyst model to generate a built-in electric field to enhance the electrocatalytic effect on sulfur electrochemistry. Theoretical and experimental results have jointly demonstrated that the redistribution of charge and the presence of a built-in electric field at the Co/W3N4@NC heterointerface can promote the redox reaction within lithium sulfur battery during the discharge and charge processes, respectively. Experimental tests have confirmed its outstanding reversibility, achieving a capacity of 793.2 mAh·g−1 over 500 cycles at 1 C. It also shows excellent cycling performance with only 0.05 % attenuation per cycle over 800 cycles at 2 C for LSBs. Furthermore, even with a high sulfur loading of 5.5 mg·cm−2, the S@ Co/W3N4@NC cathode maintains favorable sulfur-related electrochemistry and delivers a high areal capacity of 3.61 mAh·cm−2 as well as maintaining considerable stability. This synthetic Mott–Schottky heterostructure not only amplifies the electrocatalytic effect in LSBs, but also advances the design of catalysts for advanced high-energy-density batteries.

Nanorod In2O3@C Modified Separator with Improved Adsorption and Catalytic Conversion of Soluble Polysulfides for High-Performance Lithium-Sulfur Batteries.

The shuttle effect of soluble lithium polysulfides (LiPSs) poses a crucial challenge for commercializing lithium-sulfur batteries. The functionalization of the separator is an effective strategy for enhancing the cell lifespan through the capture and reuse of LiPSs. Herein, a novel In2O3 nanorod with an ultrathin carbon layer (In2O3@C) was coated on a polypropylene separator. The results demonstrate the adsorption and catalysis of In2O3 on polysulfides, effectively inhibiting the shuttle effect and improving the redox kinetics of LiPSs. Besides, the ultrathin carbon layer increases the reaction sites and accelerates the electrochemical reaction rate. The cell with the In2O3@C interlayer displays excellent reversibility and stability with a 0.029% capacity decay each cycle in 2000 cycles at 2C. In addition, the In2O3@C interlayer significantly improves the cell performance under high current (888.2 mA h g-1 at 2C and room temperature) and low temperature (1007.8 mA h g-1 at 0.1C and -20 °C) conditions.

Eco-friendly aqueous binder derived from waste ramie for high-performance Li-S battery

Even the sulfur cathode in lithium-sulfur (Li-S) battery has the advantages of high theoretical energy density, wide source of raw materials, no pollution to the environment, and so on. It still suffers the sore points of easy electrode collapse due to large volume expansion during charge and discharge and low active materials utilization caused by the severe shuttle effect of lithium polysulfides (LiPSs). Therefore, in this work, ramie gum (RG) was extracted from ramie fiber degumming liquid and used as the functional binder to address the above problems and improve the Li-S battery's performance for the first time. Surprisingly, the sulfur cathode using RG binder illustrates a high initial capacity of 1152.2 mAh/g, and a reversible capacity of 644.6 mAh/g after 500 cycles at 0.5 C, far better than the sulfur cathode using polyvinylidene fluoride (PVDF) and sodium carboxymethyl cellulose (CMC) binder. More importantly, even if the active materials loading increased to as high as 4.30 mg/cm2, the area capacity is still around 3.1 mAh/cm2 after 200 cycles. Such excellent performances could be attributed to the abundant oxygen- and nitrogen-containing functional groups of RG that can effectively inhibit the shuttle effect of LiPSs, as well as the excellent viscosity and mechanical properties that can maintain electrode integrity during long-term charging/discharging. This work verifies the feasibility of RG as an eco-friendly and high-performance Li-S battery binder and provides a new idea for the utilization of agricultural biomass resources.

In-situ synthesis Fe3C@C/rGO as matrix for high performance lithium-sulfur batteries at room and low temperatures

People have been focusing on how to improve the specific capacity and cycling stability of lithium-sulfur batteries at room temperature, however, on some special occasions such as cold cities and aerospace fields, the operating temperature is low, which dramatically hinders the performance of batteries. Here, we report an iron carbide (Fe3C)/rGO composite as electrode host, the Fe3C nanoparticles in the composite have strong adsorption and high catalytic ability for polysulfide. The rGO makes the distribution of Fe3C nanoparticles more disperse, and this specific structure makes the deposition of Li2S more uniform. Therefore, it realizes the rapid transformation and high performance of lithium-sulfur batteries at both room and low temperatures. At room temperature, after 100 cycles at 1C current density, the reversible specific capacity of the battery can be stabilized at 889 ± 7.1 mAh/g. Even at −40 °C, in the first cycle battery still emits 542.9 ± 3.7 mAh/g specific capacity. This broadens the operating temperature for lithium-sulfur batteries and also provides a new idea for the selection of host materials for sulfur in low-temperature lithium-sulfur batteries.